Installing French Drain Equipments: Pooling Water Causes Structure Damage but Green Landscape gardening Helps

There are many circumstances where a home might experience water drainage problems. One of the most typical is where a neighbor's property sits at a greater elevation. The rainwater will normally drain pipes to the lower residential or commercial property and pool in low spots. This can result in foundation damage which leads to pricey structure repair. Or, in some locations, it's likelying to trigger basement damage. One direct solution is installing French drain systems.

Any excessive rainwater going over the roofing system may be managed with seamless gutter downspouts.
Gutter Cleaners Portland How Does it Accomplish Rainwater Runoff?

The drain basically creates an underground channel to funnel rainwater overflow from one location to a lower one. It's a very excellent example of green landscaping.

Choosing the Place for a French Drain

When planning excess rainwater runoff, choosing the location for the drain is the most essential step. The area where the water is pooling is the obvious starting point. The trick is finding a lower spot to divert the water to.

Digging the trench is the physically toughest part of this Do It Yourself task. Phone lines, gas lines, and coax laid by cable TELEVISION services.

When a possible trench line has actually been determined, it's important to get all such services involved to be specific that no lines are cut. Not just will this minimize getting into a significant can of worms, it will show that due diligence has actually been done if things go awry.

Trenching Dimensions

This is the easy part-- planning the depth and width of the French drain system. At a minimum, the trench ought to be at least 6" broad and even broader depending on the volume of runoff rainwater. When it comes to the depth? Clearly, it needs to begin at least as deep as the most affordable spot where it swimming pools.

The bottom line is that the level where the water is provided to should be lower than the pooling location in order for the French drain system to be functional. Preferably, the grade ought to be one foot drop for one hundred feet of trench length. Inspect the depth using a level staked string line running from one end to the other.


Finishing the Drain

Now that the trench is done, line it with landscaping fabric. Pea gravel will work, but a coarser gravel will definitely drain more efficiently.

Fold the landscape fabric over the gravel. The purpose of the is to keep sand and soil from wandering down into the gravel, hindering water circulation.

Cover this with a layer of coarse sand to anchor it all, then include soil up to the lever where lawn sod will lay level with the lawn. Proceed with the sod setup, and it's objective accomplished!

Leave a Reply

Your email address will not be published. Required fields are marked *